• STANDARD POWDER COAT COLORS - RED RAMPS, GRAY COLUMNS, AND GRAY CROSSBARS

• CUSTOM POWDER COAT COLORS AVAILABLE - CONTACT US TODAY FOR COLOR CHART AND SPECIFIC PRICE FOR PARTICULAR COLOR.

DRIVE-THRU -

• 1 SET OF STEEL APPROACH RAMPS ARE INCLUDED WITH LIFT.

• THE DRIVE-THRU OPTION IS A 2ND SET OF APPROACH RAMPS WITH NECESSARY HARDWARE FOR APPROACH RAMPS AND DROP-IN TIRE STOPS.

RAMPS

• STANDARD RAMP LENGTH IS 13 FT.-
• 14 foot
• 15 foot
• 16 foot

CUSTOM SIZE LIFTS-

• TALLER OR SHORTER LIFTS

• WIDER OR NARROWER LIFTS

• ENCLOSED TRAILER

CASTER KIT -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO MOVE THE LIFT. YOU WILL BE ABLE TO MOVE LIFT FAIRLY EASY BY YOURSELF WITHOUT A CAR ON IT. WITH A CAR ON THE LIFT IT WILL TAKE FOUR TO FIVE PEOPLE TO MOVE.

OPERATION: THE CASTER KIT IS SELF-ACTUATING AND WILL PICK-UP THE COLUMNS BY ITSELF - NO MANUAL PRYING OF THE COLUMN BY YOU! THE CASTER KIT IS FOUR ARMS WITH EACH ARM HAVING A BOLT-ON CASTER WHEEL THAT IS 360 DEGREE SWIVEL ACTING. TO PLACE CASTER KIT IN POSITION THE IDEAL LOCATION OF THE LIFT HEIGHT IS WHERE THE LOCK ON CROSSBAR JUST STARTS TO RATCHET ON THE FIRST LOCK STOP OF THE COLUMN AT APPROXIMATELY 18 INCHES OFF THE GROUND. EACH ARM IS PINNED INTO THE CROSSBAR AT EACH CORNER OF THE LIFT. THE CASTER ARM WILL HANG AT A 45 DEGREE ANGLE AS THE LIFT IS LOWERED. AS THE CASTER WHEEL OF EACH ARMS CONTACTS THE GROUND THE ARM WILL START MOVING INTO A HORIZONTAL POSITION. AS THE ARM MOVES INTO THE HORIZONTAL POSITION IT GOES UNDERNEATH TWO COLUMN PEGS ON EACH SIDE OF THE COLUMN. WHEN THE ARM CONTACTS THE COLUMN PEGS IT BEGINS TO ACT LIKE A LEVER AND LIFT THE COLUMN OFF THE GROUND. THIS OCCURS ON ALL FOUR CORNERS. THE COLUMN WILL BE RAISED ABOUT AN INCH TO INCH AND A HALF OF THE GROUND. NOW THE LIFT IS IN POSITION TO BE MOVED. TO REMOVE THE CASTER KIT YOU RAISE THE LIFT TO WHERE THE LOCK ON CROSSBAR BEGINS TO RATCHET IN PLACE ON FIRST LOCK AND THEN REMOVE PINS FROM CROSSBAR AND THE CASTER KIT CAN BE STORED OUT OF THE WAY.

JACK BRIDGE -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO PLACE YOUR OWN SMALL BOTTLE JACK, SMALL FLOOR JACK, OR SMALL JACK STANDS IN TO REMOVE TIRES OR OTHER RELATED MECHANIC WORK. SOME CUSTOMERS WHO USE LIFT FOR LONG-TERM STORAGE AND WANT TO REMOVE TIRES FROM THE CAR WILL PURCHASE TWO JACK BRIDGES AND WITH FOUR JACK STANDS CAN REMOVE ALL FOUR TIRES FOR LONG-TERM STORAGE.

OPERATION: THE JACK BRIDGE IS A HEAVY-DUTY PIECE OF CHANNEL WITH ANGLE WELDED FOR SUPPORT. THE JACK BRIDGE IS PLACED BETWEEN THE TWO MAIN RAMPS AND ACTUALLY RESTS ON THE MAIN PORTION OF THE RAMPS FOR ADDED STABILITY. SINCE THE LIFT HAS A POWDER COATED FINISH THE BRIDGE WILL EASILY SLIDE ALONG THE RAMPS. IT WAS RECOMMENDED BY THE ENGINEER THAT TESTED THE LIFT TO NOT MAKE THE BRIDGE WITH ROLLERS BECAUSE IF THE BRIDGE IS NOT POSITIONED PROPERLY IT WOULD HAVE A TENDENCY TO "KICK OUT" FROM UNDERNEATH THE JACK OR JACK STAND.

DRIP TRAYS -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO PROTECT BOTTOM CAR WHEN USED FOR STORAGE. WE RECOMMEND 6ea TO COVER ALMOST THE ENTIRE LENGTH OF THE LIFT OR AT LEAST 3ea TO COVER ENGINE, TRANSMISSION, AND REAR END.

OPERATION: THE DRIP TRAYS ARE CUSTOM BUILT FOR THE LIFT AND ARE NOT PURCHASED AS A UNIVERSAL SIZED ITEM. THE DRIP TRAYS ARE THICKER AND FIT BETWEEN THE RAMPS MORE SECURELY THAN UNIVERAL STYLE DRIP TRAYS. THE DRIP TRAYS ARE MADE FROM INJECTION-MOLDED PLASTIC, ARE LIGHT WEIGHT, AND ARE STACKABLE. APPROXIMATE SIZE IS 3 foot wide x 2 foot long WITH ABOUT A 1 inch LIP AROUND EDGE OF DRIP TRAY TO HELP KEEP FLUIDS ON THE TRAY.

Front Mount Bracket -
CLICK HERE FOR PHOTO

USE: MAKES HYDRAULIC CONTROLS MORE ACCESSABLE IN TIGHT QUARTERS.

OPERATION: THE FRONT MOUNT BRACKET IS MANUFACURED OF HIGH QUALITY STEEL AND ATTACHES TO THE POST WHERE IT WAS ORIGINALLY INSTALLED. IT ESSENTIALLY MOVES THE LOCATION OF THE HYDRAULIC CONTROLS TO THE FRONT OF THE LIFT.

MOBILE OIL DRAIN -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO EASILY DRAIN OIL AND OTHER FLUIDS WHILE LIFT IS RAISED.

OPERATION: THE OIL DRAIN HAS A LARGE 8gal CAPACITY TANK WITH EASY POUR SPOUT WHEN YOU DISPOSE OF THE OIL. THE LIFT IS ON CASTERS, SO IT IS PORTABLE. THE FUNNEL IS APPROXIMATELY 10 inches IN DIAMETER AND TELESCOPES UP AND DOWN. THE FUNNEL ALSO HAS A SCREEN TO KEEP DEBRIS FROM ENTERING TANK OR "LOSING" THE DRAIN PLUG INTO TANK. THE OIL DRAIN IS MADE FROM A DURABLE PLASTIC WITH ALUMINUM TELESCOPING TUBE AND CASTERS.

ALUMINUM RAMPS/ALUMINUM TIRE STOPS -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO MOVE APPROACH RAMPS EASIER.

OPERATION: THE STANDARD APPROACH RAMPS INCLUDED IN THE PRICE OF THE LIFT ARE 30" APPROACH RAMPS AND ARE TWICE AS HEAVY AS THE ALUMINUM. THE ALUMINUM RAMPS ARE MADE WITH 3/16" THICK TREAD-BRITE ALUMINUM WITH SUPPORTING GUSSET WELDED DOWN THE MIDDLE OF THE RAMP FOR EXTRA SUPPORT WHILE THE VEHICLE IS DRIVING ON THE RAMP. 6" TREAD-BRITE ALUMINUM TIRE STOPS ARE INCLUDED WITH THE ALUMINUM RAMP PURCHASE AT NO EXRTA CHARGE! THE 36" ALUMINUM RAMPS WILL REPLACE THE 30" STEEL RAMPS AND CAN BE LIFTED AND PLACED INTO BOLT-ON BRACKET AT THE END OF THE LIFT YOU WILL BE DRIVING ON. THEN AFTER DRIVING ON LIFT THE RAMPS CAN EASILY BE REMOVED SO WHEN THE LIFT IS RAISED IN THE AIR YOU WILL NOT RUN THE RISK OF HITTING YOUR HEAD AS YOU WALK AROUND THE LIFT.

SIT-ON CREEPER -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO SIT ON CHAIR TO ROLL AROUND AND DETAIL CAR. IF THERE IS NOT ENOUGH CEILING HEIGHT IN THE GARAGE TO RAISE THE CAR TO THE HIGHEST LOCKING POSITION THE CHAIR CAN BE USED WITH LIFT IN A LOWER LOCKING POSITION AND YOU CAN ROLL UNDER THE LIFT AND STILL PERFORM MAINTENANCE WORK. MANY CUSTOMERS WHO USE THE LIFT FOR SERVICE ONLY AND CANNOT EVEN USE LIFT FOR STORAGE BECAUSE OF CEILING CONSTRAINTS WILL STILL PURCHASE A LIFT AND RAISE THE LIFT TO THE HIGHEST POSSIBLE LOCKING POSITION AND ROLL UNDER THE LIFT ON THE CHAIR. WHEN FINISHED WITH MAINTENANCE WORK THEY WILL LOWER THE LIFT TO THE GROUND, LEAVE THE VEHICLE ON THE LIFT, AND THE LIFT CAN BE LEFT ON THE GROUND UNTIL YOU ARE READY TO LEAVE OR TO DO MORE MAINTENANCE WORK ON THE VEHICLE.

OPERATION: THE SIT-ON CREEPER HAS A DURABLE-PADDED SEAT THAT TELESCOPES UP DOWN WITH A PNEUMATIC CYLINDER. THE CYLINDER CAN BE RAISED OR LOWERED BY PRESSING A LEVER LOCATED DIRECTLY UNDER THE SEAT. THE SEAT WILL ALSO ROTATE 360 DEGREES. THE SIT-ON CREEPER IS MOUNTED ON A STEEL FRAME WITH CASTERS. THE CASTERS ARE HEAVY-DUTY TO ROLL AROUND ON A FAIRLY ROUGH SURFACE. THE STEEL FRAME CAN ACT AS A TRAY FOR EASY PLACEMENT OF TOOLS SO YOU WILL NEVER FORGET WHERE YOU PUT YOUR TOOLS.

SOLID DECK -
CLICK HERE FOR PHOTO

USE: ENABLES YOU TO PARK SEASONABLE ITEMS SUCH AS JET SKIS, SNOW MOBILES, FOUR-WHEELERS, LAWN MOWERS, GOLF CARTS, AND ETC.

OPERATION: THE SOLID DECK IS MADE IN TWO SECTIONS OF 1/8" FORMED DIAMOND PLATE STEEL. EACH SECTION CAN BE LIFTED WITH HELP OF AN ASSISTANT AND PLACED BETWEEN THE RAMPS. THIS FILLS IN THE SPACE BETWEEN THE RAMPS AND ALLOWS FOR STORAGE OF THE SEASONABLE ITEMS THAT ARE NOT CURRENTLY BEING USED.